How to create a personalized workout plan from scratch

How to create a personalized workout plan step by step: the split, volume and progression that fit your level and goal, based on ACSM guidance.

Topic: TrainingBy Fytform TeamUpdated on 11 min read

Notebook with a weekly workout plan next to a dumbbell, representing how to create a personalized workout plan
Article topics
  1. Why does a generic workout tend to stall your progress?
  2. How do you know your training level?
  3. Which training split should you choose?
  4. How much to train: volume and intensity
  5. How do you progress your training over the weeks?
  6. What is periodization and how do you plan for the long term?
  7. What are the most common mistakes when creating your own workout?
  8. How do you put it all into practice?
  9. Sources
  10. Frequently asked questions

Updated on 2026-11-17

To create a personalized workout plan, define your level, choose your split based on how many days you can train (Full Body for 2 to 3 days, Upper/Lower for 4, Push/Pull/Legs for 5 to 6) and start with about 10 weekly sets per muscle group. Use loads you can lift for 8 to 12 reps at first and increase the load by 2% to 10% when you go past your rep target, as the ACSM recommends.

If you have ever walked into a gym and felt lost about what to do, you are not alone. Many people start with generic programs from the internet or by copying the workout of someone with completely different goals. The result is usually a lot of effort for little progress.

Creating a personalized workout plan means fitting the program to your level, your goal and your routine. Below are the decisions you need to make, in order: level, split, volume, load, progression and how to organize it all over the weeks.

Why does a generic workout tend to stall your progress?

Think of a cake recipe: the proportions change with the size of the pan. Training works the same way. A program designed for a 90 kg man with 5 years in the gym does not suit a 60 kg woman who has never trained.

Generic workouts ignore variables such as fitness level, injury history, available equipment, how many days you can train and, above all, your goal. The American College of Sports Medicine (ACSM) position stand on strength training itself says that its recommendations should be applied according to each person's goal, physical capacity and training level.

On top of that, a program well above your level tends to create more fatigue and soreness than you can recover from, and that raises the odds of quitting or getting hurt. Starting below what you can handle and progressing is safer than starting at your limit.

How do you know your training level?

Before building any program, be honest about where you are. There is no point in calling yourself intermediate if you have been training for 2 months with frequent gaps. The criteria below are a practical reference (the ACSM, for example, calls someone with about 6 months of consistent training an intermediate):

Beginner

  • Has not yet mastered the technique of compound exercises (squat, bench press, deadlift)
  • Can add load or reps often, almost from one workout to the next
  • Often gets delayed onset muscle soreness
  • Does not yet have an established training rhythm

Intermediate

  • Performs the basic exercises with good technique
  • Load no longer goes up every week
  • Needs variations and planning to keep improving
  • Understands concepts such as volume, intensity and reps in reserve

Advanced

  • Progress is slow and requires long-term planning
  • Uses techniques such as drop sets, rest-pause and cluster sets with judgment
  • Volume and intensity need careful adjustment
  • Has been through at least one significant plateau

Which training split should you choose?

The split is how you spread muscle groups across the week. There is no "best" split in general: there is the split that fits the days you have. A meta-analysis by Schoenfeld and colleagues (2019) showed that, with the same weekly volume, training a muscle 1, 2 or 3 times a week produces similar hypertrophy. So choose based on your schedule. For a detailed comparison, see Full Body, Upper/Lower or Push Pull Legs.

Full Body (2 to 3 times a week)

Trains the whole body in every session. A good option for beginners or for people who can only get to the gym 2 or 3 times a week. Every muscle is worked in every session, which helps you learn the movements and build a base.

  • Example: Monday (Full Body A), Wednesday (Full Body B), Friday (Full Body A)
  • Focus on compound exercises: squat, bench press, row, overhead press
  • 3 to 4 main exercises per workout, about 3 sets each

Upper/Lower (4 times a week)

Alternates upper-body and lower-body workouts. It works well for beginners who have found their rhythm and for intermediates. It allows more volume per muscle group without sessions that are too long.

  • Example: Monday (Upper A), Tuesday (Lower A), Thursday (Upper B), Friday (Lower B)
  • Each muscle is worked 2 times a week
  • 4 to 6 exercises per session

Push/Pull/Legs (5 to 6 times a week)

Splits training into push (chest, shoulders, triceps), pull (back, biceps) and legs. It makes the most sense for intermediate and advanced lifters who train 5 or 6 days and need more total volume.

  • Example: Monday (Push), Tuesday (Pull), Wednesday (Legs), Thursday (Push), Friday (Pull), Saturday (Legs)
  • With 6 days, each muscle is trained 2 times a week
  • 5 to 7 exercises per session

How much to train: volume and intensity

Volume is the total amount of work (sets x reps x load). Intensity is how heavy you train relative to your maximum. The balance between the two determines whether you progress or stall.

How many sets per muscle group per week?

The meta-analysis by Schoenfeld, Ogborn and Krieger (2017) found a dose-response relationship: more weekly sets tend to produce more hypertrophy, with a trend toward better results from 10 sets per muscle per week compared with fewer than 5. In practice, start close to 10 weekly sets per muscle group and only add more if you are recovering well.

How many reps for each goal?

Load ranges from the ACSM position stand (2009)

GoalRepsLoad and rest
Beginner (general)8 to 12 RMA load that allows 8 to 12 reps
Strength (intermediate/advanced)1 to 12 RM, emphasis on 1 to 63 to 5 min rest
Hypertrophy1 to 12 RM, emphasis on 6 to 121 to 2 min rest
Muscular endurancemore than 1540% to 60% of 1RM, rest under 90 s

If you want to improve your physique, the 8 to 12 rep range is practical and easy to manage. But it is not the only one that works: another meta-analysis by Schoenfeld and colleagues (2017) showed similar hypertrophy with light and heavy loads when sets are taken close to failure. Maximal strength, on the other hand, improves more with heavy loads. To go deeper, see sets and reps for hypertrophy.

How do you progress your training over the weeks?

The most important principle is progressive overload: the ACSM states that progressive protocols are needed to keep stimulating adaptation. Without progression, your body gets used to the stimulus and improvement slows down.

Progressing does not mean adding load every week. There are several ways to do it:

  • Increase the load: add weight to the exercise (the most direct route to strength)
  • Increase reps: do more reps with the same load
  • Increase sets: add a set to the exercise
  • Adjust rest: keep your performance with shorter rest periods
  • Improve technique: perform the movement with more range of motion and control

Training and nutrition go hand in hand. To find out how many calories you burn per day, use the free TDEE calculator. And if your goal is to build muscle, the muscle-building guide covers diet and recovery.

What is periodization and how do you plan for the long term?

Periodization means organizing your training into phases with different goals. Instead of repeating the same thing forever, you alternate periods of more volume, more intensity and recovery. The ACSM recommends using the range of loads in a periodized way for intermediate and advanced lifters.

A simple model that many people use is to work in blocks of a few weeks:

  • Start of the block (adaptation): moderate volume, focus on technique
  • Middle of the block (progression): gradual increase in load and/or volume
  • Lighter week (deload): fewer sets or less load to recover
  • New block: starts again from where the previous one ended

The lighter week may feel like a waste of time, but it helps reduce accumulated fatigue before you go back to progressing. If you are always tired, your performance is dropping and you do not feel like training, that is a good sign you need one.

What are the most common mistakes when creating your own workout?

Now that you understand the fundamentals, here are the mistakes that most often trip up people who build their own program:

  • Training only what you like: skipping legs or neglecting your back creates imbalances. Spread the volume across all muscle groups.
  • Changing your workout every week: if you do not repeat exercises for a few weeks, you cannot tell whether you are progressing.
  • Ignoring compound exercises: the ACSM recommends prioritizing multi-joint exercises before isolation work. Curls and lateral raises have their place, but squats, bench press, deadlifts and rows should be the foundation.
  • Not logging your workouts: without notes, you do not know if you are improving. Use a notebook or an app to record loads and reps.
  • Too much volume too soon: more sets help up to the point you can recover from. Increase gradually.
  • Resting too little between sets: the ACSM suggests 1 to 2 minutes for hypertrophy and 3 to 5 minutes for heavy loads. More in rest between sets.

How do you put it all into practice?

Creating a personalized workout plan means weighing a lot of variables: level, frequency, equipment, history, goal, weak points and preferences. That is why so many people end up on generic programs: personalizing takes work.

The most important thing is to start. An imperfect workout done consistently gets you further than the perfect workout you never follow. Apply the principles in this guide, log your progress and adjust as needed.

If you would rather skip the planning stage, Fytform builds your split around how often you train, with each muscle trained 2 times a week: full body with 2 or 3 days, upper and lower with 4 or 5, and push, pull and legs with 6.

Sources

Frequently asked questions

How many days a week should a beginner train?

The ACSM position stand recommends 2 to 3 days a week for beginners and 3 to 4 for intermediates. More important than the number is being able to keep up the routine and recover between workouts.

How many sets per muscle should I do per week?

A 2017 meta-analysis showed that more weekly sets tend to produce more hypertrophy, with a trend toward better results from 10 sets per muscle. Start close to that and increase gradually if your recovery allows.

Is training each muscle 2 times a week better than once?

With the same weekly volume, a 2019 meta-analysis found no meaningful difference between frequencies. Splitting it into 2 sessions often makes it easier to do more quality sets, but you can choose based on your schedule.

How long should I rest between sets?

The ACSM suggests 1 to 2 minutes for hypertrophy training and 3 to 5 minutes for heavy strength sets. More in rest between sets.

Do I need a medical checkup before I start?

If you have heart disease, high blood pressure, diabetes or a recent injury, are pregnant, take long-term medication or are a minor, get medical clearance and guidance from a qualified fitness professional before starting.

Fytform Team

Written and reviewed by the Fytform editorial team on November 17, 2026. This is general information: it does not replace an individual assessment by a doctor, dietitian or fitness professional. Spotted a mistake? Write to contato@fytform.com.

Keep reading